Search results

Hi there, i have been asked to install a basic cabinet around a fuse box for a friend. The fuse box is on the wall above an internal door right underneath the stairs :x The right hand side of the cabinet would need to be cut at an angle to accomodate the slope from the stairs. Apologises but...

For the past couple of days my scrollsaw has been cutting slowly at top speed. When I turn the variable speed knob to anything below the top speed the blade stops moving. Anybody any ideas what could be causing the machine to stop cutting at lower speeds. It is a SIP 16" if that helps.

Happy New Year People. I was given 5 strips of pine wood from a neighbour who was clearing out his garage. The size of the strips are 18mm thick by 7 inch wide and approx 7 feet long. I was going to make a bookcase from them however every strip has a bend which goes all the way down the...

Hi folks, Haven't been on for a while. I have been using the SIP scrollsaw and have had enough of the blade slipping from the clamp. I have filed it down sanded it. Sanded the blades. Still the Blades are slipping. So I am wanting a more substantial scroll saw where hopefully I wont have the...

I am thinking of making my kid a dinosaur jigsaw out of 18mm MDF. However I am not sure what paint or finish to use. I was thinking about using non toxic acrylic paint. Due to it being a jigsaw I don't think the paint would last long. Is there a finish that I could put on that is child friendly...

Evening folks. Does anybody know how long the warranty is on the 16"Sip. I can't find anything on their website.

Hi guys, Got a problem with the screw that inserts into the top clamp. The saw I am using is the SIP 16" TIghtened the screw and noticed that the key slipped in the screw. Took the key out and tried a second brand new key. Still Slipped. I am unable to get the screw to come out. It will not...

I am going to orlando for a fornights holiday. I am going to buy Olson blades for my machine whilst there. Probably buy them from Woodcraft store. Can anybody advise on what is the best Olson blade to purchase.

Hi folks, If it has been asked before then I apologise. How do you guys cut straight lines. Every time I try and cut a straight line the blade wanders off ](*,) I have tried various makers of blades, different teeth. I have also tried different speeds and blade tension. Still no joy. Any...

I volunteered to do arts and crafts in the work. I work with elderly people who have Dementia. Was thinking of doing some work on the scrollsaw and then getting the residents to paint them. The manager has asked that if possible, could the work be made to put in their bedrooms. I was...

Are they having a laugh. Most fanciable politician. Warning: May offend. http://news.sky.com/sky-news/content/St ... 546829.jpg

Here we go The teddy bear was copied onto the wood from a template. I then used a premanent marker to draw freehand. the detail. By the way the teddy bear is not attached to the red block that is for another project.

Hi, I am looking for a stockist of blades in the uk. Preferably Flying Dutchman. Any ideas?? I know people rate Mikes website from the states but I need them straight away. Thanks.

Does anybody know where I can purchase a sanding mop. Or where I can buy the materials to make my own. i obviously can get the sandpaper. Here is a link as to what I am looking for. http://scrollsawworkshop.blogspot.com/2 ... cheap.html Cheers.

First time using the scroll saw and made these. http://s256.photobucket.com/albums/hh18 ... CN3232.jpg http://s256.photobucket.com/albums/hh18 ... CN3226.jpg http://s256.photobucket.com/albums/hh18 ... CN3224.jpg http://s256.photobucket.com/albums/hh18 ... CN3220.jpg...

I need a new table insert. I have been putting to much pressure on the blade whilst cutting, which has resulted in the plastic table insert being badly damaged. :oops: :oops: I contacted the company with regards to a replacement. I was quoted £18.00 for 1 replacement and delivery. Is this a...

When over in Florida I Purchased a couple of packets of these. http://www.craftsman.com/shc/s/p_10155_ ... saw+blades Being a newbie. I must say that they are fantastic for cutting intricate shapes in the middle of the wood. Hope that makes sense :oops: Okay they might not be the best of...

Hi guys, Decided to buy my first Scroll saw. After narrowing it down to two beginner machines I decided on the SIP 16". Have to say that I can't walk away from the machine. It is addictive. Meant to be working today. Think I will phone in Sick :D Still trying to get used to cutting tight...

I am planning on building a wooden castle for my son. The castle will be for his toy knights and other figures. Does anybody know of any websites where it would give me ideas. I have googled looking for ideas but nothing has been helpful. I am thinking of using 6mm Ply and MDF Thanks

Hi there, I have just made a bookcase for my daughters room. My question is how do you round off the edges of the wood so that they are not square. If that makes sense. I'm using 18mm MDF Do I use a router with a bit. If so what bit???? Or do I use something else. Cheers