What are these screws?

[BearTricks]

They were used to screw the drawer knobs on to a sideboard I recently finished restoring.

A smarter man would have screwed them back in to the knobs for safe keeping, instead they migrated between coat and jeans pockets for six months until I put them in a safe place. I finally finished assembling the sideboard this morning, went to my safe place and two of them had vanished.

I'm hoping they're a standard screw and not something silly. The sideboard is mid century I think. I got it for a fiver because some idiot had a go at refurbishing it before me and ended up slapping a badly cut piece of plywood on top and painting it neon green. The knobs at least look original.

Sent from my LG-H815 using Tapatalk

 

[Wildman]

machine screws possibly 1/4" whitworth

 

[Eric The Viking]

1/4" Whit. Pretty common, and still used a lot over the Pond. Sensible thread, too.

How long do they need to be (measure from under the head to the end, and in inches! ) ?

I probably have some with hex ends (hacksaw your own slots!). If you have a lathe you might even dome them off yourself.

Other thing is recourse to any long-established ironmonger. They can still be found, but they're becoming rare.*

E.

*both.

 

[Yetty]

1/4" Whit, also available via that well known auction site!

 

[Droogs]

I believe they are pan head machine screws

 

[RogerP]

Pan Washer Head Philips Machine Screws

 

[Myfordman]

Careful before ordering 1/4 whit screws. Knobs and handles normally use 3/16 whitworth.

Simple measure the od and expect them to be a bit under the nominal size.

 

[arnoldmason8]

When you have decided what you want look on Ebay for GWR Fastenings Ebay shop. They have hundereds of items in small quantities, cheap and free delivery.

Regards -----Arnold

 

[BearTricks]

Figured out what they are, I think. They're 3/16" x 13/16" flange head whitworths. There are a couple of sellers on eBay.

I've placed a bid but I'll have a rifle through my odds and ends drawers too but If anything they've probably taken a trip through the dog.

Sent from my LG-H815 using Tapatalk