Ttrees

I'd suggest fleabay or gumtree to find a bargain. Since you mention resawing + guitars, one might get the impression of acoustics, so it...

No-one makes a pro level 14" saw, for good reason, the blades for resawing wouldn't like to bend around 14" wheels. Why limit yourself...

I was under the impression most newer saws, than my early later model Startrite 275 had a left hand thread arbor nut. Not sure if...

It appears you might be able to get one cheaply, i.e unsure if Charnwood ones might work...

I've got a few old 4" angle grinders wot let the magic smoke out of, seems possibly a good application to use to shaft from... I was...

There's a lot to be said about a long, i.e 8 foot floating top, slim fire door etc... which can be stored upright. Make some nice...

You could make it along the lines of a folding pasting table but using 4x2 or 3x2 etc, then an extra full size top that sits on top...

it came out fine, although it's been very cold so probably took longer to cure than normal, seems rock solid, the jelly beans that came...

It appears like those scratches are from suspended very course grit. Have you since got an idea of what the surface is like?

Or two benches which lock together.. It sounds for a very good option to me, nice foot stool saw horses to match too. Don't forget to...

If it can be against a wall, could you mount back edge of bench on sturdy hinges along wall, turny-cleat-thingy to hold it up when its...

What we're seeing there is anticlastic curvature, a trick of the eye, as the blade needs feel that crown, whether one can see it or...

The lower wheel should to be co-planar for belt alignment, though to check that one needs to have faced wheels. I've mentioned the...

Not sure why you'd find argument there, but matching crowns for me please!

But seemingly very difficult for many to get a modern plane to work, like a well working vintage! The cost being the reason why most...