Melinda_dd
Established Member
I think I know what the answers are going to be but........
Bought a Clarke cbs 190 bandsaw yesterday .....this was due to budget and space we didn't go for a more pricey one.
Want to cut some 3mm vaneers from a 41mm square stock....
It won't cut a straight line!
I'm going through super slow
Tried 20mm pine... same problem
Tightened blade, put the guard down as low as possible. No better
The blade is the one it came with and is 6tpi
rubbish quality blade?
Any input would be great
Bought a Clarke cbs 190 bandsaw yesterday .....this was due to budget and space we didn't go for a more pricey one.
Want to cut some 3mm vaneers from a 41mm square stock....
It won't cut a straight line!
I'm going through super slow
Tried 20mm pine... same problem
Tightened blade, put the guard down as low as possible. No better
The blade is the one it came with and is 6tpi
rubbish quality blade?
Any input would be great