Wude blade's gor knife handle wire wrap?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RickJoW

Established Member
Joined
21 Apr 2021
Messages
31
Reaction score
2
Location
cheshire
Hi fellas.
As the title says I am after a blade about 2mm wide.. Most coping saw blades are less than a millimeter so I am looking fir one that can cut a 2mm or so channel, so that I can press fit an approximately 2mm twisted silver wire wrap.
Any ideas?
 
you may wish to make something more like a float, but that's also a bit of a tall order, I suppose.

To do it, you'd want to find 2mm stock and cut teeth in it (assuming this is a shallow cut).
 
you may wish to make something more like a float, but that's also a bit of a tall order, I suppose.

To do it, you'd want to find 2mm stock and cut teeth in it (assuming this is a shallow cut).
I always thought you needed Icecream and a can of coke
 
Put 2 or 3 blades together side by side, could wrap it with wire or even glued together.
 

Latest posts

Back
Top