UKworkshop.co.uk

Help Support UKworkshop.co.uk:

T
Reaction score
202

Latest activity Postings About

    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Thank you again for all your help. I will have some more questions later about the slats, once I have the bed frame built . I think...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Thanks, So I will create top tenons of the footboard rail and headboard rail with a 30 mm top shoulder, 85 mm tenon, and a 5 mm bottom...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Thanks for the advice. Fortunately, I did not make anything yet, just this single leg. Other components are just dimensioned to size...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      I was also thinking about filling the gap at the top of the already made leg with 22 mm long and 40 mm deep piece of oak rectangle. I...
    • T
      tibi reacted to Sgian Dubh's post in the thread Bowed long boards - any remedy? with Like Like.
      Go with that. No need to fork it. Slainte.
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Well, I have looked at my drawings and I have decided to leave the already made leg as it is (with the risk of splitting later) and...
      • 1656965623993.png
      • 1656965765767.png
    • T
      tibi replied to the thread How many seconds did you last..
      The man above has almost as many subscribers as Ishitani furniture. Both of them are just a tad behind Paul Sellers. Add 200k to Paul...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Thank you for your explanation. I have always thought that rule of thirds refers only to the thickness of the tenon, not the width. I...
      • 1656947550542.png
      • IMG_1224.JPG
      • IMG_1226.JPG
      • IMG_1227.JPG
      • 1656947793715.png
      • 1656947807683.png
      • 1656947819715.png
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Thanks a lot Richard, I will do as you advised. I have made a guide for morticing that will keep side of the chisel perpendicular to...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Thank you very much. I have learnt something new. Do I need to make both mortices longer to allow for wood expansion? Does anything...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      What is the correct procedure for cutting that forked mortice? Do you cut two separate mortices and then remove the material between for...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Exactly, but my mortices will be blind, so no kerfs for wedges and relief holes are necessary. However, I will drawbore them, as I do...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      Thank you. Yes they are two serial tenons following each other, not two parallel tenons, so word double was inappropriate. I did not...
    • T
      tibi replied to the thread Bowed long boards - any remedy?.
      What is the adequate size for tenon when legs are 50x50 mm and rails are 25 mm thick? Will 12 mm tenon be thick enough for a bed? Only...
    • T
      tibi replied to the thread Handsaw ripping competition idea.
      Japanese saws are 3x shorter than a western saw, and are prone to break if they are used incorrectly or with too much vigor. So if the...
  • Loading…
  • Loading…
Top