UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
S
Reaction score
168

Latest activity Postings About

    • S
      Hi Mark, Please refer to the "for sale" rules at the top of the forum and post a fixed price. I'll leave the advert in place for a day...
    • S
      scholar replied to the thread Cutting 10 mm Polypropolene.
      Don’t know what bandsaw you are having problems with, but I would think any bandsaw with a decent blade (probably 10 TPI) should do this...
    • S
      scholar replied to the thread Sash windows advice.
      This does look very poor all round, both the making of the windows and the painting. It looks like the mouldings have been done very...
      • IMG_7144.jpeg
    • S
      scholar replied to the thread Sold Stuart-Turner No.12 Pump.
      Hello Brian This may do me for a long running plan to recycle rainwater from an old brick-lined 12m deep tank we have in our backyard...
    • S
      scholar replied to the thread Builder Depot - Birch Plywood.
      It seems as though the supply issues following the sanctions against Russia may have eased. My supplier stocks BB/BB and that is showing...
    • S
      scholar replied to the thread Another alcove shelves post....
      Just on templating - this does make the whole job much easier all round. My technique is to use strips of 6mm plywood or mdf - say...
    • S
      scholar replied to the thread Another alcove shelves post....
      Just on templating - this does make the whole job much easier all round. My technique is to use strips of 6mm plywood or mdf - say...
    • S
      scholar replied to the thread Another alcove shelves post....
      I have done this (with some shelves made up of a sandwich over a ladder frame). Two things: a) I would keep the batten and housing...
    • S
      scholar replied to the thread Scheppach TS4010 blade allign.
      As well as the alignment with the riving knife as I have described, the other thing to check is that the arbour is actually running true...
    • S
      scholar replied to the thread Scheppach TS4010 blade allign.
      I have sold my TS4010 now, but possibly the attached guidance on refitting the main arbour may help. Basically as I recall, the arbour...
    • S
      scholar replied to the thread Plunge saw blade advice ?.
      Well, I would advise against the Panther blade. Read this thread which has a lot of discussion on it - it was a bit inconclusive, but...
    • S
      scholar replied to the thread Diamond grinding cup.
      I have hired a concrete floor grinder in the past - make sure you hire the biggest vac they make available for it - the amount of dust...
    • S
      scholar replied to the thread Ercol restoration.
      I really would stick to scraping with some good scrapers to get all of the finish removed - then sand down carefully with the grain...
    • S
      scholar replied to the thread Riving knife thickness.
      Quite a useful thread, thank you. I am currently just trying to work out the riving knife arrangement with my Hammer B3 saw/spindle...
    • S
      scholar replied to the thread Bosch 12V circular saw.
      Basically copy that. I have a pretty full range of 12v Bosch stuff and they all get used for odd jobs - I rate them. I would say the...
  • Loading…
  • Loading…
Back
Top