Kitchen banquette

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

OliT

Established Member
Joined
19 Jun 2019
Messages
34
Reaction score
1
Location
London
Morning all. I've been requested to make a banquette for our kitchen. Does anyone have any advice on dimensions, heights, etc? It's relatively small corner seat, and discussions on storage are still ongoing!
There are no access issues so can either by built in situ, or in my shed or a combination of both.
Thanks in advance,
Oli
 

Ollie78

Established Member
Joined
4 Aug 2011
Messages
1,394
Reaction score
636
Location
Wiltshire
I have made one of these before, from what I remember we just took the height from the clients favourite chair. So made the frame 100mm lower to allow for the foam cushion.
I made a framework up to support everything, made seat base and back from plywood then made up cushion bases and backs which were sent to the upholsterer to put the foam and cloth on to.
This particular situation required parts that could be removed to access pipework behind the seating so I attached all the cushion parts with buttonfix so they can be removed.

Ollie
 

Latest posts

Top