Help Support UKworkshop.co.uk:
-
-
DDoug71 replied to the thread Plunge saw - battery or corded?.I remember reading on the Festool Owners Group that the 3.1ah batteries will NOT run the TSC55, don't know if this is still true with...
-
DDoug71 replied to the thread Recommendations for a Planer/Thicknesser.I tend to keep out of these discussions as I think it's up to the individual what they want to spend their cash on and when it's a hobby...
-
DDoug71 reacted to robmarshall's post in the thread Workbench build and the subsequent fitted cupboards/shelves with
Like.
Hi everybody, I said hello in the new members thread down below in Jan/Feb this year looking for thoughts on my proposal for a... -
DJust being alive will kill you eventually.
-
DDoug71 reacted to deema's post in the thread Sedgwick MB Planer Thicknesser Full Refurbishment with Thanks.
@Doug71 again, an assumption you are using the ‘lugs’ on the Esta carriers to set the knife depth. Usually this means that the knives...
-
DDoug71 replied to the thread Sedgwick MB Planer Thicknesser Full Refurbishment.@deema yes you are correct I use the lugs on the carriers to set the knife depth and my scale does read about 1.5mm when it should be...
-
DDoug71 replied to the thread Some staircase questions....A bit of inspiration for you here
-
DIt does depend upon how dry your timber is and how dry the house is. The doors I am doing are a bathroom and walk in wardrobe accessed...
-
DDoug71 replied to the thread Sedgwick MB Planer Thicknesser Full Refurbishment.Yes the zero isn't zero but no I don't have standard blades, I use the ESTA type blades and carriers, I did wonder if this might be the...
-
DDoug71 reacted to deema's post in the thread Sedgwick MB Planer Thicknesser Full Refurbishment with Like.
@Doug71 I’m not sure what you exactly mean about accuracy of the scale, however, I’m interpreting it that the zero position on the scale...
-
DSurely if whatever joint being used is cut square then when the gap is properly closed (clamps) it's going to be square. If it's not...
-
DDoug71 replied to the thread Oak ledge and brace doors - t&g needed?.On an internal door I generally fit the boards tight together as normally they will shrink but on an external door or gate I would leave...
-
DDoug71 replied to the thread Woodpecker clamping squares.You wont get any cheaper than this.
-
DDoug71 replied to the thread Sedgwick MB Planer Thicknesser Full Refurbishment.Quick question, is the scale for the planer table adjustable at all? Mines not accurate, it doesn't really bother me but would be nice...
-
-
Loading…
-
Loading…