Quantcast
  • We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Engineering items for help with

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Lindas

Established Member
Joined
26 Jun 2019
Messages
156
Reaction score
0
Location
Salford
Hello everyone,

Would you be kind enough to look over these engineering items. I have taken out the Moore and wright things and these are the others which for the most part seem older. Some have brand names some don't. The picador thing I wonder if it is more for a table saw? As well as identification I am wondering what is best to do with them.

There are 3 things I have no idea if they are just scrap but they were in the drawer with these so perhaps I can ask you first.

Many thanks. And just writing this has made me realise how much UK workshop members have taught me. I am now teaching others how to look up realised items on e..y, it seems a lot of people don't know.
 

Attachments

Lons

Established Member
Joined
14 Feb 2010
Messages
7,406
Reaction score
161
Location
Northumberland
Interesting items in the second pic, the picador is I assume the mitre guide which can be used with tablesaw, bandsaw, spindle moulder etc. anything with a suitable slot that fits the bar. I have one of those which I adapted for my bandsaw, in fact if I did a quick search I have at least 95% of those items. :oops:

I'd either sell all as a job lot or separate the mitre guide, vernier gauge, dial guages and lump together the various calipers as a lot as they're of interest to woodturners.

I doubt there's anything there worth very much tbh
 

Trevanion

Greatest Of All Time
Joined
29 Jul 2018
Messages
3,775
Reaction score
555
Location
Pembrokeshire
Looks like the others have sussed what the mitre clamp thing is :) No idea what those little pieces on the loom are, especially with them being all different sizes you would assume they’re definitely for something.

Second picture has some nice bits in there! You’ve got various internal and external callipers for measuring round lathe stock, you’ve got what looks to be a nice Vernier caliper, there’s some feeler gauges, radius gauge and a thread gauge. Theres a couple of woodworking marking gauges with the round stems which might be worth a lot to collectors. There’s also a pair of dividers, a couple of dial indicators, thread dies and stocks, a couple of hand clamps, a couple of drill/wire gauges and mitre gauge for some kind of saw.

Look at the brands as some can be worth quite a bit like Mitutoyo, Brown and Sharp or Moore and Wright.

Hope that helps.
 

Lindas

Established Member
Joined
26 Jun 2019
Messages
156
Reaction score
0
Location
Salford
Thank you everyone one. It does indeed help and I can begin to separate out and put like with like. The mitre corner tool might not be there any more but at least I know what these are.
 

MusicMan

Established Member
UKW Supporter
Joined
1 Jul 2015
Messages
1,926
Reaction score
101
Location
Warwick
Put the things with many holes in them together. Some are drill gauges, some I think are die plates, but they are related.
 

Sheffield Tony

Established Member
Joined
2 Aug 2012
Messages
2,080
Reaction score
81
Location
Bedfordshire
The things on the copper wire look like interchangeable nozzles/cutters (can't think of a better word) like for a pop-riveter, leather punch or something ? Does the wide end have an internal thread ?
 

Lindas

Established Member
Joined
26 Jun 2019
Messages
156
Reaction score
0
Location
Salford
Many thanks again. It all helps in progressing things a bit further. With the metal and wood turning lathes to prepare for sale perhaps it might be good to put related items with them.

It's like the mitre spring clips, if, like me with these, you have no idea if scrap or of use you just don't know. It does feel like it has turned a corner with the clearing now. We sold some of the cheaper bits, hinges, old locks, padlocks, sand paper, at Dewsbury market. There were crowds! And 2 people offered to buy our stock (?) but only for a tiny offer, I think we caused a bit of a stir.
 

Robbo3

Established Member
Joined
28 Jan 2012
Messages
1,997
Reaction score
81
Location
Oxfordshire
The second item down in the first pic could be made into a depth gauge with a 6" to 9" length, of suitable diameter,dowel or rod.
To use place the flat bar on the rim of the item being turned. Push the dowel through the hole until it his the bottom & lock it with the thumb screw. Move the dowel to the outside of the item with the flat bar on the rim & note the difference between the outside of the base & the end of the dowel to give the thickness of the wood at the bottom.
 

Latest posts

Top