Bought a chainsaw mill!!

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

slemishwoodcrafts

Established Member
Joined
13 Sep 2007
Messages
374
Reaction score
0
Location
Northern Ireland
So bought myself a chainsaw mill tonight. Based on the Alaskan mill they are made by a company in scotland. Had been looking at grabbing a used granberg on eBay but saw theirs instead. Hopefully will arrive before Christmas and I will share pictures and a review on it!
It looks the part and was a fraction of the price!
fe7f83a73bc0d860acb97983fc034c5d.jpg



Sent from my iPhone using Tapatalk
 
The guy doesn't make them in Scotland. He just imports them from China. There has been a lot of discussion on Arbtalk forum about them. In fact Rob who is a distributor for the real Alaskan Mill started selling them as well as a cheaper starter kit for folk who wanted to get into milling but weren't sure if they would stick at it. Which saw are you going to be running with it?

Mike
 
They are nicknamed Chilaskan mills but by all accounts pretty good.
 
Got a link? We have an Alaskan mill at work with a 30" bar but we've got a couple of trees coming up which are wider than that...
 
acewoodturner":3gkkh80s said:
The guy doesn't make them in Scotland. He just imports them from China. There has been a lot of discussion on Arbtalk forum about them. In fact Rob who is a distributor for the real Alaskan Mill started selling them as well as a cheaper starter kit for folk who wanted to get into milling but weren't sure if they would stick at it. Which saw are you going to be running with it?

Mike

Didn't realise they were a Chinese import. Makes sense though.
Will see how it goes planning to sell a portion of what I mill to recoup costs.

Got a husqavarna with 28" bar I plan to use it with


Sent from my iPhone using Tapatalk
 
I run a 36" bar on my Stihl 066 for milling and last year my mate gave me his 088 with a 54" bar after having a heart attack (not whilst using a chainsaw by the way!) We have planked up dozens of logs over the years. His mill was homemade but its made from steel so I am going to buy longer rails for my Alaskan in order to make it a lot lighter to use.
He can help me a little but I think I will end up doing 90% of the hard graft which I don't mind
 
0b74e17cd3949a700bda4032ce5b0121.jpg
4b0ae01ff913d7bcd2e736d14f538679.jpg
d7ab6ccb70a1f9c1fb79d4c32ebbbe47.jpg


So it finally arrived after being delivered twice to the wrong sorting depot! (Shrewsbury and then Birmingham)

Got it built up last night and I'm rather impressed. I had worried that it would be flimsy after hearing it was made in China and imported but it seems very robust and there is a good weight to it!
Going to hopefully get a trial run tomorrow


Sent from my iPhone using Tapatalk
 
Haha not for a good few years! She enjoyed helping though. After it was assembled I turned round and found her with a wrench in her hand trying the get it round the nuts!


Sent from my iPhone using Tapatalk
 
What size of bar are you planning using? Is there a minimum/maximum size you can use with the mill?
 
I've got a 28" saw that I am planning to use. You can buy various sizes of mill, up to 48". This one will take up to a 36" bar.


Sent from my iPhone using Tapatalk
 
What size saw are you running, that looked painfully slow, maybe the chain / rakers needed a good filing.

Im running a 36" on my 288 husky and even on crosscut chain it cuts a 24" log pretty quickly. I must get some ripping chain to try at some point.

Sent from my SM-G800F using Tapatalk
 
It's a husky 390xp with a 28" bar. It was quite slow but I discovered the wood I was using as a guide rail was creating resistance as it is fairly rough. After I ran over it with the power planer it was much quicker. Just need to get a ripping chain now to speed up


Sent from my iPhone using Tapatalk
 
tomlt":362nladz said:
What size saw are you running, that looked painfully slow, maybe the chain / rakers needed a good filing.

Im running a 36" on my 288 husky and even on crosscut chain it cuts a 24" log pretty quickly. I must get some ripping chain to try at some point.

Sent from my SM-G800F using Tapatalk

Agreed - that was awfully slow. Ripping needs a powerful saw and a sharp chain (possibly several). We usually take 4 with us and swap during the day rather than sharpening in the wood - buy spares from http://www.northernarbsupplies.co.uk/58 ... hain-loops as they're around 1/3 the price of stihl/oregon (probably husky as well). They don't do ripping chains but you can bring them down gradually to the correct angle.
If your saw doesn't have an adjustable oiler that you can set to the maximum then you may need to consider adding an auxillary oiler or just dripping oil onto the bar every now and again.

And using a mill might be slightly safer than regular saw use (bar is mostly in the timber) but I'd be wearing full ppe all the time.
 
Hello All,

I have an Alaskan mini-mill and a smallish Husky chainsaw (455 Rancher) with a 20" bar on it.

This is way underpowered for milling, but even so, it is possible. As a hobby user I just have to accept it takes a lot longer than it would with a big saw.

Ripping chain makes a HUGE difference, I tried milling a tree which had been felled a year previously, I was using a sharp normal chain and I was barely making any progress at all. The info on the Arbtalk forum convinced me to have another try with ripping chain.

With ripping chain I was cutting 16 foot planks the full depth of the bar in about five minutes.

As mentioned in an earlier post, ripping chain dulls quite quickly, I bought a 12 volt grandberg sharpener, and sharpen the chain about every second time I refuel the saw, as the time spent sharpening is a lot less than the extra time it takes to cut with a dull chain.
 
Back
Top