UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Y
Reaction score
11

Latest activity Postings About

    • Y
      yan89 replied to the thread Sharpening.
      I did that same course around 6 weeks ago, in the same shop, but with Nick Thompson who I think bought the shop from Chris, or did a...
    • Y
      yan89 reacted to Blackswanwood's post in the thread Sharpening with Like Like.
      I have the T3 which I think has become the T4 in the current range. Either of these will do what you are looking for...
    • Y
      yan89 replied to the thread Sharpening.
      Sorry to continue questioning, but when you say 'full speed' 6 inch grinder, is there a set speed it should (or shouldn't) exceed? I'd...
    • Y
      yan89 replied to the thread Sharpening.
      On this 'dry grinder & course wheel' method, are you referring ideally to an 8 inch CBN wheel used without a water bath?
    • Y
      yan89 replied to the thread Sharpening.
      Out of interest, which Tormek did you go for? and which attachments do you need for plane & chisel sharpening alone? Still completely...
    • Y
      yan89 replied to the thread Sharpening.
      When you say it's 'slow', I presume it's much quicker than hand-grinding?
    • Y
      yan89 reacted to Blackswanwood's post in the thread Sharpening with Like Like.
      No it’s not the only way - there are 101ways and you won’t find consensus on which is best. If you have a few days (weeks) to spare...
    • Y
      yan89 replied to the thread Sharpening.
      Oh really? I have a trend 300/1000 diamond stone and the veritas honing guide and it still took me a good 40 mins.. When you say...
    • Y
      yan89 reacted to Jacob's post in the thread Sharpening with Like Like.
      No it's not ever been already mentioned elsewhere! o_O :ROFLMAO: It's fast freehand on an oil stone once you've got the knack of...
    • Y
      yan89 reacted to D_W's post in the thread Sharpening with Like Like.
      bench grinder is probably the cheapest. Cheap grinder, decent rest (you can make it if you have to) and the coarsest wheel you can find...
    • Y
      yan89 replied to the thread Sharpening.
      Sorry if this is already mentioned elsewhere, but is a bench grinder the only way to reset a primary bevel without spending 40 mins...
    • Y
      yan89 reacted to Jacob's post in the thread Plough and Rebate plane advice with Like Like.
      What I found was that although 78 has the nicker, depth stop and fence what you find in practice is that these are less useful than they...
    • Y
      yan89 reacted to bazzason's post in the thread Plough and Rebate plane advice with Like Like.
      Worth checking that the irons haven’t been butchered. The sides should have a slight angle to them - just acute of square. If they have...
    • Y
      yan89 replied to the thread Plough and Rebate plane advice.
      Cracking detail here D_W - thanks very much for going to the effort.
    • Y
      yan89 reacted to Jacob's post in the thread Plough and Rebate plane advice with Like Like.
      Shouldn't any fettling they are pretty simple devices but the user instructions could be handy. Should be out there on the net somewhere!
  • Loading…
  • Loading…
Top