Wixey WR510 and Triton Thicknesser

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Seiken

Established Member
Joined
28 Feb 2017
Messages
168
Reaction score
0
Location
Camberley
Hi,

Has anyone fitted a Wixey WR510 digital readout to a Triton TPT125 thicknesser? I'm considering it but can foresee problems due to the moulding that may mean some alterations on this thicknesser (its not listed as a been done before on the wixey/dro sites).
 
I've already got the manual but there are not enough dimensions to help, I asked Allandale but they only know about the ones listed by Wixey. Next move will be to ask for dimensions. The problem I foresee is the cover molding thins down where the dro would fit and so is not flat also there is zero clearance between the cover moulding and planer carriage so screws are not an option.
 
In that case it is possibly not suitable, have you looked at the other read out devise's they offer, I have ordered the 550 to fit my planer thicknesser.

Mike
 
Back
Top