My latest jig creation

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

ola c

Established Member
Joined
7 Aug 2014
Messages
41
Reaction score
13
Location
sweden
Hi,

Think there might be some interest in this. Used it a few weeks now and as it's name implies, it certainly is a superjig for tenons and boxjoints. I call it a gamechanger and that's what I see it as. Developed for the table saw but could be used on router table as well as long as there's a miter channel in the table. 3 part video, each part around 20mins. As I say in the beginning of the first part, plans and build videos will follow if the interest for it is big enough.

If you want to see what it's good at and how accurate it is, watch part 2 or 3, but I recommend watching part 1 first for understanding of the concept.

(Didn't know under which category to place this but hope it's ok here.)

 
Last edited:

ola c

Established Member
Joined
7 Aug 2014
Messages
41
Reaction score
13
Location
sweden
Started working on the plans, 3d CAD completed but will still take a while though to complete the plans. Today I made a new discovery.. using all 4 pins this jigs cuts boxjoints on odd millimeters just as simple as it does for even millimeters. In the videos I say it cuts boxjoint on 4,6,8,10,12,14,16mm ..and so on but that will be changed now. This jig cuts box joints of 3,4,5,6,7,8,9,10,11,12,13,14,15,16,17... millimeters:).

Will make a short update video on this subject the coming weekend.

20220127_181123.jpg
20220127_181133.jpg
 
Last edited:
Top