codmaster127
Established Member
can anyone tell me were i can buy a grizzly tenon jig to fit my table saw in the uk , thanks
help grizzly tenon jig
- Thread starter codmaster127
- Start date
Help Support UKworkshop.co.uk:
Richard S
Established Member
You can't exactly, Grizzly do not have a retail presence in the UK, however you will probably find that their jig is a generic version of the one that I believe is available from Rutlands. Similar types come up from time to time on EBay and I recall one being offered on the For Sale board her fairly recently. Just check your mitre slot sizes are compatable.
codmaster127
Established Member
i have a sedgewick saw only a few months old ,what about dakota brand
Myfordman
AKA 9Fingers
If you get one with the wrong size guide bar, it is trivial to make and fit a different size one.
Standard ones seem to be 3/4" x 3/8"
Powermatic have a very nicely designed one http://www.thewoodwhisperer.com/videos/ ... oning-jig/
and Axminster are starting to carry some of their products so maybe one day?............
Standard ones seem to be 3/4" x 3/8"
Powermatic have a very nicely designed one http://www.thewoodwhisperer.com/videos/ ... oning-jig/
and Axminster are starting to carry some of their products so maybe one day?............
Superstrat
Established Member
codmaster127
Established Member
can you buy powermatic tenoning jigs in the uk
Richard S
Established Member
No
Superstrat
Established Member
The Woodford-supplied saw, seen here...
https://***********************/saws-ac ... ge-30.html
... is the exact same saw as the Grizzly G0690, seen here...
http://www.grizzly.com/products/10-3HP- ... rizzly.com
... but Woodford's is badged Harvey or Xcalibur.
Woodford provides a tenoning jig for their saw, see here...
https://***********************/saws-ac ... /jigs.html
... which looks exactly the same as the Rutlands jig mentioned in my previous post, see it again here...
http://www.rutlands.co.uk/sp+woodworkin ... ota+dk2087
You need to add VAT and delivery charges to Woodford's prices, so Rutlands would likely be the cheaper option.
Is this what you're looking for?
https://***********************/saws-ac ... ge-30.html
... is the exact same saw as the Grizzly G0690, seen here...
http://www.grizzly.com/products/10-3HP- ... rizzly.com
... but Woodford's is badged Harvey or Xcalibur.
Woodford provides a tenoning jig for their saw, see here...
https://***********************/saws-ac ... /jigs.html
... which looks exactly the same as the Rutlands jig mentioned in my previous post, see it again here...
http://www.rutlands.co.uk/sp+woodworkin ... ota+dk2087
You need to add VAT and delivery charges to Woodford's prices, so Rutlands would likely be the cheaper option.
Is this what you're looking for?
codmaster127
Established Member
thanks for your replys, not sure which way to go ,came across the powewrmatic jig and it looked so good ,only but is its not available in the uk , proberly buy one from rutlands i guess, not as expensive as well
Myfordman
AKA 9Fingers
Richard S":ixub3ocm said:
Maybe not yet but axminster are starting to carry powermatic machines
Steve Maskery
Established Member
I don't understand why you would want to buy such a thing. I really don't.
They are slow to set up, slow to move from one cheek to the next and difficult to reset if you need to make a remedial part. Plus you have to remove the saw guard to use it.
Why would anyone in their right mind want to cut tenons in that way?
I really don't get it.
They are slow to set up, slow to move from one cheek to the next and difficult to reset if you need to make a remedial part. Plus you have to remove the saw guard to use it.
Why would anyone in their right mind want to cut tenons in that way?
I really don't get it.
