Hi all.
We managed to accumulate alot of solo clamps. Rather than just bang a nail in the wall, and hang them from it, i thought id try something a bit different.
I drilled some holes in the steel bar on the lathe, then tapped a thread. There bolted through using big washers to spread the load.
It turned out alright.
Brightens the workshop up a bit anyway :wink:
Simon
We managed to accumulate alot of solo clamps. Rather than just bang a nail in the wall, and hang them from it, i thought id try something a bit different.
![845a4801.jpg](https://proxy.imagearchive.com/545/545d0564c0ba42c1568d0a648569d6a2.jpg)
I drilled some holes in the steel bar on the lathe, then tapped a thread. There bolted through using big washers to spread the load.
![597bce9c.jpg](https://proxy.imagearchive.com/bda/bda4b8dad391d2e2ad2154881f793fc6.jpg)
It turned out alright.
![811ca5ba.jpg](https://proxy.imagearchive.com/9e6/9e6f4c559e6f86991ab4943f43462622.jpg)
Brightens the workshop up a bit anyway :wink:
![a42f8c55.jpg](https://proxy.imagearchive.com/125/12541ed1fd87f6d7852e968c07adc929.jpg)
Simon