60 degree profile

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chuggy

Established Member
Joined
5 Mar 2008
Messages
48
Reaction score
12
I am looking for a couple of metres of 25mm x 25mm 60 degree aluminium or mild steel 'v' profile or even a hollow triangular section.
Any ideas ??
 
Thanks for the reply, John. Great source of profiles but, unfortunatel, not the one I need...
The hunt goes on.
 
I reckon that is going to be tough to source. Any way of modifying what you are doing to take 90 degree angle?.

Also bear in mind that the angles on profiles are not that accurate.

Bob
 
Have you got a local metal fabricator near you with a press break, should be able to fold it up from some flat strip if you don't need it much more than 3mm thick. I've had bits of steel plate bent by my local fabricators, if you are lucky they wil do it for a drink.

Jason
 

Latest posts

Back
Top