Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Q

    sharpening tct saw blades

    HI My festool circular saw blade has lost it's edge and at £55 I was wondering if it is possible to get it sharpened ? Mike
  2. Q

    sip table saw extraction

    Has anybody done anything to improve the extraction on the sip table saw. It seems to be quite poor and I have thought about trying to improve it. I use a large bag type extractor which shifts a fair amount of air. Mike
  3. Q

    aluminium plate 3mm thick for a tablesaw insert plate.

    You should use polycarbonate which is also called lexan but that could be just a brand name. It's the same stuff they make riot shields out off. I have used it for big curved boat windscreens and it's as far as I can tell it's indestructible. But it will scratch so over time you would not be...
  4. Q

    Door making sets for a router.

    The infinity tools cutters are available in the uk see the following link. http://www.infinitytools.co.uk/shop/3/110/115/index.htm Mike
  5. Q

    Oak Faced MDF Price

    I was pricing some 18mm oak faced mdf today at my local yard. £39 Plus vat for a full sheet. How dose this compare with the other end of the country. I'm in Peterhead in Scotland. Mike
  6. Q

    TRITON ROUTER SCREWS

    What thread are the base plate screws. I need to get some for table mounting.
  7. Q

    automatic door lightswitch?

    try radio spares They several of insulated switches Mike
  8. Q

    Triton Routers at B&Q

    Picked up a triton router today from My local B&Q in Peterhead near Aberdeen. It went through at £149 there are two more on the shelf plus the display model. It's the one with the free router bits. The triton saws are going for £112. Mike
  9. Q

    Fein QA55E Vacuum Extractor

    Neil I have had one for several years now and it is an excellent machine. It's the same as the Trend machine, they are all made by some Italian company for various manufacturers. The fine filter cartridge for the machine is good and worth getting. I use mine a lot for sanding plasterboard so I...
  10. Q

    Quality plywood supplier in scotland

    Hi I'm looking for a supplier of quality plywood in scotland near the Aberdeen area. Anybody out there got any ideas. Mike
  11. Q

    Tape measure

    Alf I have several stanleys and a couple of Fisco Big T tapes and the Fisco ones are the best. Mike
  12. Q

    Which mini powerdriver/drill ?

    I have the metabo one and it is exactly what you need as it comes with a chuck for drilling as well as an angled screwdriving attachment. I also have a couple of impact drivers one makita and one elu they are both excellent but not what you are after. Mike
  13. Q

    Another dust extractor question

    I got a 2hp unit from axminster and it seems very good. I mounted the motor inside the workshop and just put the bag unit outside. This way the electrics are all inside and handy and the nasty dust is outside. I would definatly go for a 2hp unit if I was you as you need to suck as much air as...
  14. Q

    Finishing for doors and stairs

    Matt I am not sure why your doors are behaving this way after dipping. After washing,drying and treating with vinegar I never had any problems. But I preferred to sand down my doors to remove the old finish as it was quick and obviously no problem with chemicals. I also had lots of panels to...
  15. Q

    Finishing for doors and stairs

    Matt In my last house I restored the pitch pine staircase and doors. For the doors which had been butchered in the 50'S by having the mouldings removed and covered in hardboard, I found the best way to strip them was with my metabo random orbit sander. I then fitted new mouldings and varnised...
  16. Q

    Fox surface Planer

    Ok so if I go down the seperates route what thicknesser do you use and is the noise a problem. The new metabo one looks ok and the price is good on ebay Are seperates a big advantage especially if your not going to be using them that much. Mike
  17. Q

    Framing Nailer

    I got a Dakota gun from Rutlands 2 years ago and it has been excellent. Mike
  18. Q

    Fox surface Planer

    Old 3phase machines are certainly the way to go if you have the space for them and don't have to move them about. Unfortunately I don't have that luxury so smaller more mobile machines are the only option. The noise from the portable thicknesser was also something I was considering, but have not...
  19. Q

    Fox surface Planer

    Has anybody got any experience with this 1200x190mm planer from fox on sale at rutlands http://www.rutlands.co.uk/cgi-bin/psProdDet.cgi/F22567 I was going to go down the planer/thicknesser route with the metabo machine but saw this and thought about separates Mike
  20. Q

    One for electricians/engineers

    You should probably be using a type c mcb as these are designed for motor circuits. Mike
Back
Top