• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Yikes

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Joined
13 Jul 2015
Messages
2,852
Reaction score
115
Location
Suffolk
Obviously thought to measure the taper..... but didn't think to measure the length!

Another thing to add to the bottom of the drawer...



Sent from my SM-J510FN using Tapatalk
 
Joined
13 Jul 2015
Messages
2,852
Reaction score
115
Location
Suffolk
That would work":34s4sath said:
Yikes, a keyless chuck! They always jam on me. Send it back :?
It weighs a ton, not worth sending back.

Just noticed it fits my lathe. Any reason not to use a keyless chuck on a lathe? (Tail stock)

Sent from my SM-J510FN using Tapatalk
 

That would work

Established Member
Joined
29 Dec 2018
Messages
604
Reaction score
18
Location
Dartford
No reason at all why not. My experience of them is probably of cheapies so probably not representative.
 

Rorschach

Guest
Joined
6 Jan 2016
Messages
7,021
Reaction score
1,109
Location
Devon
Crack on, I use keyless on my my lathe and drill press, very happy with them.
 

samhay

Established Member
Joined
10 Aug 2017
Messages
323
Reaction score
36
Location
Peak District
Surely the only option now is to buy a bigger pillar drill.
Or perhaps just a longer pillar, if you can find one.
 
Joined
13 Jul 2015
Messages
2,852
Reaction score
115
Location
Suffolk
samhay":oe76qbio said:
Surely the only option now is to buy a bigger pillar drill.
Or perhaps just a longer pillar, if you can find one.
As soon as this one breaks down :p
 

Latest posts

Top