UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
BillK
Reaction score
34

Latest activity Postings About

    • BillK
      BillK replied to the thread Best value Dremel / Rotary Tool.
      I've had a corded Dremel for donkeys. Although it hasn't seen a ton of use it got a fair lot of wobble at the chuck - the front bearing...
    • BillK
      BillK reacted to bbtex's post in the thread Veritas Mk2 Honing Guide - Issues :( with Like Like.
      Also, if the sides of the blade aren't parallel, then registering the blade by the sides will make it skewed or appear skewed when...
    • BillK
      BillK replied to the thread Help please.
      Usually it's done by black stain or paint first. Then a thinned & tinted grain filler put on. With oil-based ones you wait till it's...
    • BillK
      BillK replied to the thread Small Routers.
      The Katsu trimmer I found to be alright (RT0700 copy), there's 6mm and 8mm collets for it, as well as 1/4". Height adjustment is crude...
    • BillK
      BillK replied to the thread Unusual paint sprayer question.
      Would the squeezing action of a gun trigger not make the RSI worse? When I had severe hand problems I first noticed it using sprayguns...
    • BillK
      Well, I have finally completed my Oak hand tool cabinet. Now I’m going to be restoring all the tools (eventually🤣). Here it is…...
    • BillK
      Just a quick thanks to @PerryGunn for the Perma White recc, it's great stuff. I did the primer and first coat with an airless sprayer...
    • BillK
      I find the Heller ones are good in the small sizes, up to about 0.5mm. They seem to cope with a little flex, whereas Dormer or the PCB...
    • BillK
      BillK replied to the thread Spanner.
      I use the spindle lock and an old motorbike glove, sort of crack the thing rather than a slow pull and they come loose. Stout gardening...
    • BillK
      For small bits I use sets of carbide PCB drills, they have a 1/8" shank and come in incremental sizes down to 0.1mm. So fit easily in a...
    • BillK
      Depending what you want to do, making or fettling, but different heights can be handy to save being stooped for periods. Stools/seats...
    • BillK
      I'm not sure this is much help but with other stringed instruments using a soundbox and top, it's the top that matters the most by far...
    • BillK
      BillK replied to the thread Makita ROS issues?.
      I have the same one and the 5", both are like that and I'm sure not faulty. If you push much when starting up, without full trigger, it...
    • BillK
      BillK reacted to Pabs's post in the thread Plane Shrine with Like Like.
    • BillK
      Cheers, yes I've got the paint on the way.
  • Loading…
  • Loading…
Back
Top