Very first project

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dessoman

Established Member
Joined
27 Jul 2009
Messages
25
Reaction score
0
Location
DUNDEE
P1010029-1.jpg

80 Mortice and Tenons in this bench.
 
fantastic first project 8)
Have you got any WIP ?
Well done, i can see the bench giving you many years of service.
 
I know these can be sensitive questions, what cost is the timber for an item like this and where do you go about buying it. Did you buy the timber finished / sized or do it yourself. Is it mahogany?

thanks in advance
 
dessoman":1fj2hchl said:
no -no wood left it is so pricey.just finished big planter for wife in maghony
Unless I'm misreading, I think Alex meant WIP - work in progress photos. It's good to share :D :D
 
That's a nice bench. Not too sure about all the verticals underneath the seat but I do like it.

What technique did you use to make all those tenons?
 
I have no work in progress(to busy at work),as for the wood for this bench I got it for nothing but the cost would have been about £200.
Yes the bench is built in maghony.
To make the mortices I used my morticer
IMG_0135-1.jpg

As for the tenons I used my deft T50 Table saw with stack dado blades
578e.jpg
 
Back
Top