Table Saw w/ability to take a dado stack.

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
So consensus is there are two options for the saw (from new) : Laguna F3 @ £2,300 or the Axminster AP254LTS @ £2,500. Are there any others out there that are comparable. The Lumberjack TS1800 was mentioned but doesn't seem to be in the same league as the Laguna/Axminster along with a couple of second hand options (which is not a route I am keen to go down - unless it was a saw rebuilt by Spectric/Deema!)

If there are no others which of those two are the better saw? - am leaing towards the Laguna (bigger cut capacity, more power, rear out feed table as standard...). Spec comparison as below ;

Axminster AP254LTSLaguna F3
Blade Diameter254 mm250mm (10")
Blade RPM3,850 rpm3800rpm
Blade Tilt0° to 45°45° Left, 3° Right
Bore Size30 mm30mm
Dust Extraction Outlet100 mm100mm (4")
Max Depth of Cut @ 45º53 mm56mm (2.2")
Max Depth of Cut @ 90º76 mm79mm (3.1")
Max Width of Cut with Fence800 mm910mm (36")
Min Extraction Airflow Required1,000 m³/hr934m3/h (550cfm)
Nett Weight175 kg175kg
Overall L x W x H1,340 mm x 1,650 mm x 1,200 mm1663mm x 1652mm x 1081mm
Plug FittedUK 3 pin plug1.8m with industrial 3 pin 16 amp blue plug
Power1.65 kW2200w (3.0hp)
RatingTrade/Professional
Riving Knife Thickness2.8 mm3.0mm
Sound Power Level LwA [Uncertainty K]93 dB(A) [1.5 dB]
Sound Pressure Level LpA [Uncertainty K]76 dB(A) [1.5 dB]
T Slot Size19 mm x 9.5 mm (3/4" x 3/8")19mm to 23mm T slot (3/4" to 1")
Table Height865 mm887mm (35")
Table Size800 mm x 550 mm
Table Size With Extensions800 mm x 1,124 mm
Voltage230 V220-240v / 50Hz / 1 phase
Fence face height (Hi/Lo)80mm / 10mm (3" / 0.4")
Cost£2,500£2,300

Thanks
 

Latest posts

Back
Top