• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

T-Slot Mitre guage........

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

thomaskennedy

Established Member
Joined
8 Mar 2004
Messages
549
Reaction score
0
Location
Huddersfield, West Yorkshire
hi,
my table saw uses a t-track for the mitre guage but i want to make a panel cutter (thanks norm!! :p ) i can't find the actual metal anywhere and i cant take it off my mitre guage because i will need it and also it is fastened well on!!

so if anyone can guide me in the right direction as to where i can get it from i would appreciate it!

thanks

Tom

ps. if this fails it looks like ill have to use the router table to make it from some hardwood!
 
A

Anonymous

Guest
or thin plastic sheet - easy to cut to the width to fit the T then glue them together face to face until you get the height you want...
 
G

Guest

Guest
Axminster do a sliding mount that fits into a t-slot track,may do the trick
 
A

Anonymous

Guest
if you buy one check the sizes carefully - I've got 3 different slots on my various machines, all different sizes :)
 

Philly

Established Member
Joined
24 Nov 2003
Messages
6,874
Reaction score
0
Location
Dorset, England.
Tom,
I made mine using thin strips of oak-any hardwood will do. This is Norm's method also. Give it a coat of wax and off you go!
Cheers,
Philly
 
Top