Quantcast
  • We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Router Table Insert

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

jim4321

Established Member
Joined
8 Mar 2004
Messages
25
Reaction score
0
Location
south east london
Hi,

I hope one of you good people will be able to help me. I am building my own router table at the moment and have just taken delivery of my new Freud FT2000VCE :D

I also bought the Axminster router table insert and I also thought I would buy the template for the insert aswell.

The template comes with its own guide and bushing that you fit to the plate of the router. But the Freud doesn't seem to be able to accomodate this.

will i have to buy an additional base plate for my router or am i doing it all wrong.

Thanks for reading

Jim
 

johnelliott

Established Member
Joined
16 Apr 2003
Messages
1,105
Reaction score
0
Location
Near Swindon, Wiltshire
I'm not familiar with the Freud router, or the bits that Axminster provide, but it sounds like the Trend Unibase is what you need

John
 

tim

Established Member
Joined
5 Nov 2004
Messages
2,307
Reaction score
0
Location
Herefordshire
Jim,

I think John is right but it may also be worth checking with the Axminster Technical guys who are normally really helpful and will be more familiar with the set up requirements.

Cheers

T
 

tx2man

Established Member
Joined
27 Jul 2004
Messages
391
Reaction score
0
Location
cheshunt, herts
Hi Jim,
I too have the Freud, and i bought the RT insert from Axminster.,
but, i made my own template.
It's not too tricky to make your own,( you can use the freud bush)
and you could send the template back for something else :D

TX
 
Top