Record power chuck rp3000x

[Gilles]

I bought the record LATHE clc3 and it came with the RP3000X power chuck . I cannot locate the manual that came with the power chuck, does anyone have one the they could scan for me, or perhaps let me know where I could obtain one.
Please and thank you for any assistance.
Gilles Audette- Canada

 

[Dalboy]

Have you tried sending Record power an e mail to see if they can help with a instruction book

 

[Sideways]

The internet doesn't seem to have as many copies of this as it used to and the manual didn't sound to be that great.
Maybe this page about the 3000 model chuck will give some clues :
http://www.petermcbride.com/temp/3000/

Supposedly, the range of adjustment is rather small, the dovetail needs to be cut accurately for the chuck to grip it and the knurled collar needs to be cranked tight with a c spanner and even a hammer.

 

[Gilles]

Thank you for the picture, it does help somewhat.

 

[Frank S]

I have a copy of the manual. Email me and I will send you a copy.
Frank S.

 

[nev]

Similar if not the same
https://www.dropbox.com/s/96g7zokyg0elq ... C.pdf?dl=0