Record BS350S Bandsaw Mitre track

[Richard863]

I have questioned Chesterfield on the BS350S, gone to various suppliers, with the question " What is the width of the mitre track" for this model.
I have seen 4 of the band saws and each one had a different track width.
My reason for asking. I am so fed up with my present 14" Jet I wish to get a more reliable machine.
I have made a few jigs for the 1/2 inch track and would prefer not to remake or modify them all.
All answers welcome thank you in advance

Richard

 

[defsdoor]

Just measured mine -

The slot is 9.0-9.1mm ish
The Tee is 14.5mm

 

[KevM]

Just measured mine -

The slot is 9.0-9.1mm ish
The Tee is 14.5mm

Ditto (Record BS350S)

 

[Graham Orm]

BS300 9mm & 14mm

 

[woodndrum]

Another voter for the tad more than 9mm but less than 9.1 on my BS350 (great machine) My eyes are good enough to read the vernier scale, but my hands shake so much it won't stay still.

 

[Richard863]

Thank you all for the advice.
Ok so I modify all my jigs I built for the 20mm breed of machines.

Regards
Richard