Recommend finish for cocobolo awl handle please.

[ian_in_the_midlands]

I am making an awl with a cocobolo handle.
It still needs a bit of sanding, but it is nearly finished.

Considering the wood is cocobolo, and it is a tool handle, what finish would people recommend?
Does cocobolo need a finish at all?

Ta

 

[marcros]

I would try polishing with micro mesh. I haven't used cocobolo but I think that it shouldn't require a finish.

If you get no response, drop Jimi a message (I know he has used micro meat a few times) or Adam (aces and eights) who has finished both marking awls and cocobolo but I don't know how.

 

[bugbear]

I would try polishing with micro mesh. I haven't used cocobolo but I think that it shouldn't require a finish.

If you get no response, drop Jimi a message (I know he has used micro meat a few times) or Adam (aces and eights) who has finished both marking awls and cocobolo but I don't know how.

I'd use one of the oil finishes, certainly not anything that "coats".

BugBear

 

[Spindle]

Hi

I'd use a wax finish applied directly to the wood, (ie. no sealer).

Regards Mick

 

[paulm]

Sanding down to a fine grit and buffing on a polishing mop will give a surprisingly good polished finish as the grain is nice and tight and hard.

Cheers, Paul

 

[ian_in_the_midlands]

Went through the grades of micro mesh, then a buff on the mop.
Looks much better.

Thanks.