Newbie Question: Wadkin Flange

[Potheen]

Hi All, for my first post I wonder if I could ask some advice from the forum.

I have recently acquired a Wadkin Cross Cut, the saw is tidy but has lost its flange. I would be grateful for any advice on where I can get hold of a 5/8" Flange for ideally a Wadkin Crosscut, that said I'm sure any 5/8" Arbour Saw Flange will suffice.

Thanks in advance.

 

[tjwoodms]

Your best bet is ams who are based at the old wad kin factory in Leicester.
Ask for Tony or Steve bishop. On 01162740532
They will need the model, serial and if possible test numbers for the machine