New Member Introduction

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bashingmetal

Member
Joined
11 Mar 2024
Messages
5
Reaction score
2
Location
West Sussex
Hi, Have joined the UKW community after following the excellent Harrison L5 Lathe overhaul project by Sideways and various other contributors. Just moved up from A Southend 9 inch to the Harrison and am looking for some missing L5 parts, particularly the two 32 tooth idler gears and their shaft, that operate the feed screw reverse mechanism. Any help very welcome. Cheers.
 
Welcome
The L5 is a great lathe, had one a few years back, which I restored.
Tell us what you make and what you would like to do.
Always interested !
 
Hi, Have joined the UKW community after following the excellent Harrison L5 Lathe overhaul project by Sideways and various other contributors. Just moved up from A Southend 9 inch to the Harrison and am looking for some missing L5 parts, particularly the two 32 tooth idler gears and their shaft, that operate the feed screw reverse mechanism. Any help very welcome. Cheers.
I suggest you join up at [email protected]
Loads of helpful folk there and someone may have the bits you need.
 

Latest posts

Back
Top