UKworkshop.co.uk

Help Support UKworkshop.co.uk:

S
Reaction score
110

Latest activity Postings About

    • S
      sawtooth-9 replied to the thread Fobco drill press clean up.
      I have used POR 15 ( Hardnose brand ) which is a two part urethane. It's great because you can spray or brush. I have used it on many...
    • S
      sawtooth-9 replied to the thread I've cancelled my subsription.
      I guess I am classed as a freeloader. I came to this site with the desire to help others tackle some interesting challenges and share...
    • S
      sawtooth-9 replied to the thread Made or Built.
      It's sad, but in Aus - back in the 1970"s - ( leaving socialist politics aside ) we "killed" local manufacturing. It's part of the...
    • S
      Just remember that where the cabinets meet the floor - this area can get wet. If you are going to use plywood, suggest you use...
    • S
      sawtooth-9 replied to the thread Electric vehicles.
      It just might be that the fundamental issue ( which no one seems to talk about ) is that there are just too many people. To halve the...
    • S
      sawtooth-9 replied to the thread Fobco drill press clean up.
      To remove the motor Remove the drive belt Looks like you may have to remove the motor step pulley to withdraw the motor - this may...
    • S
      sawtooth-9 replied to the thread Pear wood. Should I steam it?.
      I assume you will cut the timber from the log into a suitable size - ready to stack and season. When you have done that, you should see...
    • S
      sawtooth-9 replied to the thread Electric vehicles.
      Electric cars might sound ok for non-commercial use over limited distances - but there are massive ( unsolved ) recycling issues. People...
    • S
      sawtooth-9 replied to the thread Fobco drill press clean up.
      I am not familiar with FOBCO, but am currently re-vamping my Strands geared head drill press. I totally re-built this 30 years ago. If...
    • S
      Just go to a ship chandler - they have an acid based teak scrub. There are products that work a treat on restoring teak I had a small...
    • S
      sawtooth-9 replied to the thread drum sander?.
      Depends on the size and proposed use ( as with all tools ! ) I have a drum sander that works up to a 3 inch diameter drum _ enough for...
    • S
      sawtooth-9 replied to the thread Electric vehicles.
      Probably not BUT recycling is the issue. Recycling can be done, but the economics are not real. So most will just "close their eyes" and...
    • S
      sawtooth-9 replied to the thread Compressor advice.
      Having had several piston compressors, I ended up with a Hydrovane compressor About 3 Kw and it's reasonably quiet. It does for spray...
    • S
      Buy a metal milling machine. If you have a metal lathe , you might find a mill complimentary Cost a bit more than 100 quid ! But are you...
    • S
      sawtooth-9 replied to the thread Fobco drill press clean up.
      Yep, send some pics so we can see what you are describing. Suggest you NEVER soak machinery in vinegar - it's a weak acid. Always best...
  • Loading…
  • Loading…
Top