info on chair plans

[trojan62]

hi all
for those that asked, the pallet planks that i used were 3 1/4 inch and this is the web site i got the plans from:

http://www.hellocotton.com/to/dom5#http ... printable/

just dowload the plans, print them at full size and then make yourself some good plywood templates in case you ever want to make any more chairs in the future.

cheers

chris........

 

[MARK.B.]

Where would you be able to get them printed full size ?

 

[AndyT]

Where would you be able to get them printed full size ?

First option - you can probably get a good enough result with the domestic printer you already have - look around in the print settings for something like 'poster mode' and select '100%' instead of 'auto resize'. This should produce a stack of A4 that you can tape together to make a big sheet.

Second option - take the file to a high street instant print shop who can print it on a big plotter. This will give more accurate results - but you don't really need precision for a project like these chairs.

 

[MARK.B.]

Andy,
Many thanks for that info,will look at having a go at tapeing pages together.

Regards

Mark