Festool Midi Extractor/Dust Deputy Ultimate Combi

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

thecableguy

New member
Joined
14 Sep 2012
Messages
2
Reaction score
0
Location
Isle of Man
I was recently looking for a small portable dust extractor for site use and to be used primarily with my Festool TS55 plunge saw in mind. I finally bit the bullet and went for the Festool Midi, and during my research liked the idea of the Dust Deputy, and being able to replace plastic bags which would be cheaper than the Festool bags..

Both arrived today, and I thought I would just give my feedback should anyone be interested in either system.

I was happy with how easy it was to swap over the hoses and everything needed to connect both systems was included with the Dust Deputy Ultimate.

My main concern was connecting the Dust Deputy onto the Midi, as had seen issues with the latches and the need to cut out slots. Oneida who produce the Dust Deputy have obviously addressed these issues and they click together without any modifications required.

To summarise there was only about ten minutes of work putting together the Dust Deputy out of the box, and they integrate fine. My only niggle as others have commented, was having to attach the gaskets to the lid and top of the Dust Deputy...not a big issue though.

I now need to earn some ££££ to justify to my Mrs why this was a must purchase (hammer)

Hope this is of some use.

Cheers,

Scott
 

Attachments

  • F7.jpg
    F7.jpg
    99.6 KB
  • F6.jpg
    F6.jpg
    96.8 KB
  • F5.jpg
    F5.jpg
    52.9 KB
  • F4.jpg
    F4.jpg
    51.5 KB
  • F3.jpg
    F3.jpg
    52.3 KB
  • F2.jpg
    F2.jpg
    70.8 KB
  • F1 (1).jpg
    F1 (1).jpg
    72.8 KB
Back
Top