Sawdust
Established Member
I bought one of these because it looked good value and a reasonable way to get started with a ducted system around my workshop:
http://www.axminster.co.uk/product-100m ... 803510.htm
Well the pipes are OK but the T-junctions should be Y-Junctions (fair enough, I knew that when I ordered it), the 90degree bends are useless because they reduce to about 2.5 inch diameter in the middle of the bend, the joiners don't stay on the blast gates and the blast gates clog up with sawdust and don't close properly.
Rubbish - don't make the same mistake I did!!!
Cheers
Mike
http://www.axminster.co.uk/product-100m ... 803510.htm
Well the pipes are OK but the T-junctions should be Y-Junctions (fair enough, I knew that when I ordered it), the 90degree bends are useless because they reduce to about 2.5 inch diameter in the middle of the bend, the joiners don't stay on the blast gates and the blast gates clog up with sawdust and don't close properly.
Rubbish - don't make the same mistake I did!!!
Cheers
Mike