Circular saw

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bvmsheds

Established Member
Joined
9 Dec 2015
Messages
98
Reaction score
0
Location
clitheroe
Hi gang , I am after a circular saw for diy work , had a evolution but bearings are weak, budget £100 . Retired now hobby work etc thanks for your time . Regards Bernard.
 
I have one of these which are £90 from tool station and a cracking saw

Einhell TE-CS 190 1500W 190mm Circular Saw 240V
 
You want a big one to cut 70mm

I had an erbauer 235mm which was a beast and well made.

Don't think it's made anymore.

Cheers James
 
Is a 70mm depth of cut necessary or is it a guess? I think I would rather have a smaller lightweight saw that would cut if I could get away with it and make a cut from each side on the odd occasion that I needed to.

Obviously you know what you need it for and how often. 70mm is an odd size at least for me, with most things being 40mm or less and most of the rest being cross cuts on fence posts or beams which would be bigger than 70mm anyway.
 
I've been running an Aldi one for a couple of years. Light DIY work interspersed with periods of heavy use; full house renovation, shed building etc. I may even change the blade someday. Will eventually replace, when I can figure out which brand I want to 'adopt'.
 
Back
Top