J Jiroma Established Member Joined 18 Aug 2009 Messages 23 Reaction score 0 10 Sep 2010 #1 hi all, I have just finished making a small end table in beech with iroko inlays and i have put on 2 coats of danish oil. Will this be enough to protect the surface or should i varnish over this. Jiroma
hi all, I have just finished making a small end table in beech with iroko inlays and i have put on 2 coats of danish oil. Will this be enough to protect the surface or should i varnish over this. Jiroma
Calpol Established Member Joined 20 May 2007 Messages 598 Reaction score 0 Location Sunny Scotland 12 Sep 2010 #2 You'd normally wax over oil I think rather than varnish, although oil can be used in it's own right...
You'd normally wax over oil I think rather than varnish, although oil can be used in it's own right...
G Graeme Established Member Joined 2 Jun 2008 Messages 84 Reaction score 0 Location East Sussex 13 Sep 2010 #3 I was always told to keep danish oiling unit it wont absorb any more. Admittedly that may be only two coats with beach, but I would try to do more.
I was always told to keep danish oiling unit it wont absorb any more. Admittedly that may be only two coats with beach, but I would try to do more.