Search results

Send them by ship!!! Air freight is silly for heavy stuff. If you really want to compare options & get advice, talk to a shipping agent (they deal with air / surface).

Thanks, both of you. A dark heart is quite common in native ash.

If you buy rubbish then you will get rubbish. In my view, since the purchaser (you in this case) is often innocent, it is unethical to sell such poorly-conceived products. Not worth repairing.

Vapour barrier inboard of framing & insulation to prevent moisture from the inside air entering wall structure where it will migrate towards the outside & condense in cold outdoor conditions. This can be a sheet of polythene. Lap & tape the joins. Cladding needs venting behind. Use 25mm...

So you joined up & posted just to get a free valuation service??? I can improve on the above offer - just forward me a valuation fee of £399 ....

Funny, all these years & I never thought of that! I'll give it a whirl when I put the next blade on. But it must be more of a fiddle (slacken all guides, adjust tracking, tighten guides, make test cut, repeat ...) and I hardly use the bandsaw for crosscutting ... For anyone that doesn't...

Agreed.

Noise: you need an induction motor, maybe that's a given? The other main source of noise is the guides, so rollers back & sides ..? Linear accuracy is a variable. Narrow bandsaw blades especially often have a biased cut from new, that alters as they wear - thus a rip fence needs to be...

You can all keep your precious little devices - I use this -

It's circa 450mm high. Lugs of wooden hinges tenoned through the end cleats of the top. Pic 2 is closer to the real colour. Wedged through tenons. Can double as table or seat when closed. Note that the lid is self-parking when open - no stays required. .

The expression really tight is a bit misleading - I've seen overtightened compression fittings where the olive's nearly cut through the pipe! A sense of proportion's wanted!

Wide bandsaw say 100mm ... large material can be handled by one person w/o lifting gear - you just lift one end at a time. Wide b/s's often have a roller bed so even w/o a power feed you only have to push & steer the work to get the first straight cut - that then becomes a reference for further...

Lovely stuff, old growth forest, exploitation of empire!

If you can't outsource the ripping of the thicker stuff especially (80mm, 10mm) then you really need either at least a 5hp circular saw-bench (you'd be slogging with anything less) or a wide-ish bandsaw. No a bandsaw shouldn't bind, but when ripping on a circular you keep some wood wedges & a...

You sharpen twist drill tips differently for brass to get them to bite.

Ha! A fear of dovetails! What is one of the basic woodworking skills? - sawing to a line - necessary for lots of things including tenoning. If you can saw to a line, you can cut a dovetail!!! That's all it is. If you do the table idea Toby then remember to allow for seasonal movement across...

Could you line the hole with a tube?

Is the door / frame exposed to direct sun for much of the day? Yes avoid wire wool as stated. And you would be right to avoid polyurethane etc!

In order to comment, I wonder how tall / wide the gates are, & what the section sizes (of the rails) are? I think my preference would be no finish - it's a bit long-winded to explain - but that in itself doesn't solve your problem.

Diamond core drill, hire it with a big drill that has a safety clutch so it doesn't rip your arm off when it the bit snatches ... and have lots of porridge for breakfast first. What's air-con for, can't you just open a window?