Wiring up motor on Kity 1637

[Woodmatt]

I have an old Kity 1637 P/T with a removed motor which I am trying to re fit but I do not know which wire goes to which terminal.Is there out there some kind soul who has one who could tell me where the wires go,ideally a photo of inside the machine would be great but any help/advice would be great.

Thanks

Matthew

 

[Steve Maskery]

Hi Matthew
Unfortunately, to get at the motor you have to do more than remove the cover. That only exposes the belts and pulleys, the motor is still encased, which means that you have to turn the machine on its side at the very least. If you want to come over and give me a hand...

 

[Woodmatt]

Hi Steve,
thanks for the offer but you are over 4hrs away so I will give it a miss but again thanks for the offer.