• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Wanted a table adjustment wheel / handle for a Kity 635 planer thicknesser

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jon j

New member
Joined
19 Aug 2020
Messages
4
Reaction score
0
Location
York
I am looking for a table adjustment wheel / handle for a Kity 635 planer thicknesser or something i can modify to do the job any help would be great

Thanks Jon
 
Looking at the manual for my old Kity 636 there are 3 different wheels you could be referring to (although the bed-raising one for the thicknesser is the only one designed to be taken off) so I expect the 635 to be similar design. It might be easier to say what fitting the wheel has to adapt to: e.g. an 8 mm splined shaft or a 10 mm square drive, etc. As it is made in France it will certainly be metric.
 

Latest posts

Back
Top