Something to stop doors opening beyond a certain point?

[matt]

I'm after something that will stop cabinet doors opening beyond a certain point. In some cases this will be somewhere in the region of about 85 degrees, in others as much as 180(ish).

I could attach some webbing on the hinge side but I'd rather see what else might be available before I go down this route.

The doors are in a face frame on butt hinges.

Thanks in advance...

 

[Dog]

Is this what you are looking for Matt or am I 'barking' up the wrong tree
http://www.directlocks.co.uk/dgs-concea ... 2c1c81567e

 

[matt]

That certainly looks like the sort of thing except it seems as though it would need to be fitted on the edge of the door which could be a bit of a problem. Thanks anyway.

 

[Dog]

Matt, you might need to come up with something customised to do the job but what's the reason for this idea in the first place ?

Richard

 

[matt]

...but what's the reason for this idea in the first place?

I have a corner cabinet where two of the doors will hit the cabinet if they're opened too far. Also, the handle of one of the doors might go through a fish tank too. Then, the other two doors, when opened beyond 180 degrees, could pull themselves off their hinges if someone applied pressure.

It's kinda kid proofing the situation

I think you may be correct about a custom solution.

 

[Dog]

I see what you mean, Matt. Good luck with it and I hope you get it sorted!

Richard