Sharpening system selection

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ntre25

Established Member
Joined
12 Jul 2020
Messages
32
Reaction score
4
Location
Reading
Most of my work has been furniture and cabinet making. I have used an old JET waterstone sharpening machine and waterstones to sharpen my plane blades, chisels and other cabinet making tools. Recently I have been doing some turning and sharpening the various turning tools quickly and consistently is a challenge.

I can spend about £250 to get the Tormek woodturners kit or invest in the Robert Sorby pro edge system. Upgrading my JET to the Tormek T8 with all the required jigs would cost far too much.

Any suggestions which direction to take?

Thanks
 
Slow grinder and Sorby 447 jig done me well for over 20 years.
 

Attachments

  • Gouge.jpg
    Gouge.jpg
    120.3 KB
  • Sharpening rig.jpg
    Sharpening rig.jpg
    148.9 KB

Latest posts

Back
Top