Router insert Plate

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ander11

Member
Joined
10 Oct 2020
Messages
9
Reaction score
1
Location
March,Cambridgeshire
Hi guys I have decided to make my own Router table which i have been assembling parts that i need , my dad has got me this Router insert plate for Christmas !!! all good till I started looking at my router cutters I have 3 which i sent a picture width between 51.3mm to 46.50mm . The hole in the insert is around 40mm ,so i cannot adjust them up through the hole ? any ideas how i can get around this would help a lot thanks

Ian
 

Attachments

  • IMG_0378.JPG
    IMG_0378.JPG
    61.1 KB
  • IMG_0377.JPG
    IMG_0377.JPG
    56.6 KB
look around for something else.....
my router plate has a two piece top with an insert plate....but it's still not quite big enough for the biggest bits I have...
for me I'll make a new ally insert but my to do list never gets any shorter....
all the best down there....
 

Latest posts

Back
Top