I inceblundell Established Member Joined 18 Oct 2018 Messages 41 Reaction score 0 Location liverpool 4 Jan 2019 #1 looking at making a sled for my bandsaw an wanted to no were I could buy t track for the mitre slots as there not a standard fit thanks
looking at making a sled for my bandsaw an wanted to no were I could buy t track for the mitre slots as there not a standard fit thanks
S Sleepy Established Member Joined 5 Mar 2017 Messages 34 Reaction score 0 Location Durham 4 Jan 2019 #2 I have the same bandsaw and have made my own runners for sleds because, as you said, the bs350 mitre slot is annoyingly non-standard. Thin bit of wood or hdpe does the job fine.
I have the same bandsaw and have made my own runners for sleds because, as you said, the bs350 mitre slot is annoyingly non-standard. Thin bit of wood or hdpe does the job fine.
M Myfordman AKA 9Fingers Joined 19 Jan 2013 Messages 2,795 Reaction score 427 Location Southampton area 4 Jan 2019 #3 Just plane up some hardwood to fit the narrow full depth part of the tee slot. You dont need the full tee profile.
Just plane up some hardwood to fit the narrow full depth part of the tee slot. You dont need the full tee profile.
