UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
P
Reaction score
664

Latest activity Postings About

    • P
      Phill05 replied to the thread Joke Thread 4.
      This one's for Stuart. If a mouse fails to operate or should it perform erratically, it may need a ball replacement. Mouse balls are...
    • P
      I have used thin PTFE sheet between some stiff large drawers that helped a lot you can get a 600mm x 300mm x 0.25mm sheet to cut for...
    • P
      Phill05 replied to the thread Variable speed Motor.
      I have a Unimat and that was under-powered so I fixed up a 24v motor and little speed control I still kept the pulley format so I can...
    • P
      Phill05 reacted to Bluetit's post in the thread Hello from another new joiner with Like Like.
      Thanks everyone. I'm retired wood nut. I just love doing projects in wood. Over the years I've made a dining table from an old...
    • P
      What colour are you looking for? I have some 12 1/2" x 2" some are deep red some are lighter I don't know the species I bought it in the...
      • Ducks.jpg
      • Estechess_1.jpeg
    • P
      Phill05 replied to the thread Gate construction lore ?.
      Extract taken from English Heritage contractors list available from County Council approved Contractors Department. When making a...
      • image_2024-03-01_083047127.png
    • P
      Phill05 replied to the thread Help finding a fitting.
      They are called Brass page holders, are you looking for plain wire ones or something with some detail in them
    • P
      Phill05 replied to the thread endoscope recommendations.
      I picked this up from Amazon been happy with it to see down some drains where a problem was. and found it useful on finding stuff I had...
    • P
      After previously making a carved sign for my sister in law, I thought I'd make one for ourselves. This time I wanted to try using my...
    • P
      Phill05 replied to the thread Need to escape/reset.
      Hey Stig. Get some help for you and the other half as all others have said let me remind you of a message I sent you a while ago. "Hi...
    • P
      I think I have a spare 4 inch one in the shed but not sure what the spigot size is until I find it
    • P
      Phill05 replied to the thread Diamond drag experiments..
      Check out if the motor connects to the screws are tight so you don't get any backlash that could cause over run, what software are you...
    • P
      Phill05 reacted to Stigmorgan's post in the thread Mold with Like Like.
      It won't be near the kids, the space I'm thinking of is an old oil tank housing for the oil boiler and the wood will be sprayed with...
    • P
      Phill05 replied to the thread Mold.
      Stig be thoughtful, be careful not to introduce mold into the school near the kids.
    • P
      Phill05 replied to the thread Diamond drag experiments..
      Hi Chris, what are you using machine /pantograph I see a little over-run on the lower of the letters try using a wider diamond.
  • Loading…
  • Loading…
Back
Top