Quick dust extraction query...

[Kalimna]

Greetings folks,
Could anyone on this here forum recommend a supplier for 100mm dust extraction hose to go between extractor and various bits o kit - p/t, bandsaw, thickness sander etc? And as one end will be swapped over frequently- can you suggest a fitting to ease this rather than just shoving the duct on directly which seems to result in gradual destruction of said hose....
As usual, ta muchly
Adam

 

[MattRoberts]

Hi, eBay has plenty of flexible 100mm hose (just make sure to get the semi rigid PU stuff and not the tumble dryer stuff).

As for fitting - axminster do quick release hose clips,or you can get quick release sleeves

Cheers

 

[Kalimna]

Ok, thanks for that. Id had a look on ebay but thought id check that it was the right stuff.
Cheers,
Adam

 

[marcros]

somebody (possibly record power) does a dust extraction cuff for the connecting of the ducting between machines. may have been this one http://www.axminster.co.uk/102mm-hose-cuff-610697

And +1 for ebay on the ducting. http://www.ebay.co.uk/itm/PU-Flexible-D ... qL0Upsho_A