penguin

[user 19915]

Well i just a thought i have been asked to make a wooden penguin about 24 in tall and was wondering if you have made one before or even seen a video any help would be most appreciated
ALAN :lol:

 

[monkeybiter]

can't help but curious; flat or 3d?

 

[user 19915]

either flat would be easiest but a 3 d would be nice
Alan :roll: :roll:

 

[kevinlightfoot]

Get the lathe spinning!

 

[beganasatree]

Hi Alan
Have a look on youtube for a guy called Mike Peace.

Peter.

 

[user 19915]

Thank;s but i can not use a lathe
Alan

 

[Brentingby]

If flat, maybe you could use an image like one of these.

Perhaps make one of these as a base for it, too.

 

[nev]

Bandsaw, scrollsaw, jigsaw, coping saw?

Copy, crop, enlarge and print one of the family here..
http://scrollsawworkshop.blogspot.co.uk ... -poll.html
Layer two sheets of timber/ mdf/ ply/ w.h.y. and cut the outline, one for the rear and then cut the inner on the front one, lighter wood on the rear darker on the front.

 

[NazNomad]

Easy job with a scroll saw and a rasp.

Make one of these from a piece of 4x2

 

[user 19915]

thank;s for the help you have all given me a few idea;s
Alan