On/off soft start switch wiring

[britinfrance]

Can anyone with a Ryobi ETS 1825 table saw help me please? I needed to replace the capacitor on the switch assembly. The markings I made on the connections rubbed off, so I am stuffed. Ryobi agents and aftersales didn't answer despite many requests, so I appeal for your help so I don't fry the new capacitor. (failing this I have to buy a new tablesaw and I am skint)
In any description, please indicate if the green or red button is uppermost - Thanks in advance

 

[SteveF]

I don't own one, but does it have a large red knob with buttons behind?
if so the red flap should open from the bottom...lift up

someone else will be along soon

this may help https://i.ebayimg.com/00/s/MTAyNFg1NzY= ... 9/$_86.JPG


Steve

 

[NazNomad]

As above ... the red knob should press the red button behind it.

If it presses the green button, the switch is upside down.

 

[lurker]

Assume the cap is inside the black switch housing?
Let's have a look at the back of the switch.
They are all much of a sameness I think,