I would like to modify my Dremel router base attachment so that it can be fitted with a collar to follow a guide in the same way as conventional routers which are fitted with collars. By removing the two screws which fasten the router base to the multi-tool support, I've been able to create a new base out of MDF
I know, I know; the MDF needs to have its edges shaped :roll: .
I'm trying to work out the next step. The cutter has a diameter of 3mm so I presume I'll need some sort of metal tube which can fit around this. Would a 6mm internal diameter be adequate to allow swarf dispersal? Where could I get such tube and how can I fit it so as to ensure concentricity with the cutter?
Gill
I know, I know; the MDF needs to have its edges shaped :roll: .
I'm trying to work out the next step. The cutter has a diameter of 3mm so I presume I'll need some sort of metal tube which can fit around this. Would a 6mm internal diameter be adequate to allow swarf dispersal? Where could I get such tube and how can I fit it so as to ensure concentricity with the cutter?
Gill