Mdf and pocket holes

[phil2010]

Do you get a good fixing when using pocket holes for joining mdf.

 

[Noel]

Yes, done properly you get an excellent joint using suitable screws at the correct angle and depth.

 

[Gary]

Have a read here and then proceed with care.

 

[phil2010]

Thanks chaps.

 

[seanybaby]

I think it's always best to use them in conjunction with biscuits/dowels etc.

 

[Benchwayze]

I agree with backing up from biscuits.

Are you building a carcass from MDF?

I'd build an MDF carcass around a bisciut-jointed wooden frame. (Or at least around two frames of 2 x 2, (50mm square). One at the top and one at the base. Don't forget to plan for a kicking strip at the base.)

You could use a Domino to joint the frames but that depends on the depth of your pocket!

See if you can find Paul Levine's DVD (FWW Taunton) on building cabinets and you'll get some great ideas.

http://www.whsmith.co.uk/CatalogAndSear ... 0918804945

http://www.dm-tools.co.uk/product.php/sn/GMCDVD17

WHS seems cheapest but you might have to add VAT!


HTH

John