Help needed on spare old parts SIP planer thicknesser

[aworldofold]

Got an older model 01344 with broken sprockets that I'm struggling to find as discontinued - spoken to SIP tech guys & their distributors including Axeminister but all say discontinued!

Any help would be great on getting these sprockets or possibly an old machine for spares?! :?

cheers for now
Liesa

 

[Myfordman]

Sprockets are standard parts to fit standard roller chain sizes. you could adapt them to fit.
Wych bearings or bearing boys would be a good starting place , possibly ebay too. Bolton bearings are possibly another source.
measure your chain pitch and width ( could metric or imperial size), count the sprocket teeth and you are good to go.

 

[RogerP]

SIP is just one of the many clones of the ubiquitous 260 P/T so it's worth checking other (badged) makes for the parts you need.

 

[Kieran62]

I've used MTMC for all the spares rebuilding my SIP p/t.
Do any of these look familiar?
http://www.mtmc.co.uk/Images/Products/6 ... out304.gif

HTH
Kieran

 

[Kieran62]

Sorry, forgot to post the link to the page rather than the image.
http://www.mtmc.co.uk/Spare-Parts/Metab ... 61773.aspx