Glass door pivot hinge.

[squib]

Can anyone reccomend a pivot hinge for an 6mm toughened glass door as i am getting a little confused by differing prices... £4 to £60.
The door is about 32" x 80" is inset and only needs to open 90 degrees.
Any help or advice would be very welcome. Squib.

 

[jasonB]

At those sizes even the £60 option sounds a bit weak. I would be looking for bolt through hinges or having them bonded to the glass. 6mm also sounds a bit thin at that size I would be looking at 8mm

I have used these people several times for glass fittings
http://www.prefit-fittings.com/prod_pivot.html

The last Door I had made was from a company called Float Glass Design it was a 800x1300 x 8mm shower door and they supplied the bolt through hinges as the glass was not textured where the hinges fitted
http://www.floatglassdesign.co.uk/

Jason

 

[squib]

Thanks Jason, but i have to use pivot hinges as the corners ,on the hinge side are radiused,so will jam if i use butt type hinges.